2018 yCAM Forum in Padova

young Ceramists Additive Manufacturing Forum (yCAM) 2018

May 3-4 2018 

University of Padova - Padova, Italy


Venue: Palazzo della Salute Congress Center

Via San Francesco 90, 35121 Padova, Italy

Google maps: https://goo.gl/maps/8wBeJAshncs


Information on how to get to Padova and Hotel Information

 

Social event before conference:

Wednesday, May 2: for those already in Padova, informal dinner/drinks meeting after 19:00

We will meet at "la Yarda", Via Dondi dall'Orologio, 1, 35139 Padova

Google maps: https://goo.gl/maps/rpPMVBg3jdr


Programme overview (For full Scientific Programme see tap yCAM2018):






















Thursday conference reception:

The conference reception will be held at "Caffè Pedrocchi", Via VIII Febbraio, 15, 35122 Padova

Google maps: https://goo.gl/maps/VNdnd4ubBwD2


Social Event after conference:

Friday, May 4: for those still in Padova, informal dinner/drinks meeting after the museum visit



If you need an invitation letter for your VISA application, or for questions re:payments and travel grants:

Contact: Veronique Huart
European Ceramic Society - T: tel:+32 65 40 34 21 
v.huart@bcrc.be


The young Ceramists Additive Manufacturing Forum (yCAM) is an event and networking platform organized by EMC and supported by ECerS and the JECS Trust, dedicated to all young researchers interested in the Additive Manufacturing of ceramics. 

yCAM cooperates with ECerS Young Ceramists Network to advertise their reciprocal activities.

The yCAM conference covers the main AM technologies applied to ceramics and in particular the following topics:


Technologies:

  • Direct 3D printing 
  • Indirect, powder-based 3D printing
  • Stereolithography
  • Fused deposition modeling
  • Robocasting
  • Selective laser sintering/melting
  • Laminated object manufacturing
  • Novel Additive Manufacturing technologies

 

Additive Manufacturing materials and applications:

  • Silicate ceramics, pottery, ceramic art and architecture
  • Technical ceramics and advanced applications: bioceramics, porous ceramics, piezoelectric ceramics, printed circuits etc.
  • Composites and multi-material Additive Manufacturing

 

Design and software:

  • Innovative and process-driven design
  • Software and data preparation for Additive Manufacturing


yCAM 2018 conference is sponsored by the JECS Trust and by ICerS and is patrocinated by the University of Padova and the Industrial Engineering Department.


Students, young researchers or young professionals: in order to facilitate your participation, registration fees are set as low as possible (50€).

JECS Trust offers also 20 travel grants up to 300€; priority will be given to who will deliver an oral presentation. 


Link for registration and abstract submissionhttps://ycam2018.exordo.com/

On-line registration is now closed; if you did not register but would like to attend, it is possible to register on site with a registration fee of 80€ (cash only). Please inform the organizers that you will attend via e-mail at giorgia.franchin@unipd.it.

Cancellation Policy 

If a registrant is unable to attend the conference for any reason, he/she may contact the conference organisers to consider replacement by another person of the same institute/organisation.

If a registrant is unable to attend the conference for any reason, and is not in a position to transfer his/her place to another person, then the following refund arrangements apply:

-       Registrations cancelled before April 20th will be refunded 100% of the registration fee.

-       Registrations cancelled after April 20th will not be eligible for a refund.

Bank transfer costs related to refunds for non-EU persons will be for the registrants account.

Contact: Dr. Giorgia Franchin

University of Padova – Padova, Italy - T: + 39 049 827-5508 
giorgia.franchin@unipd.it


               

     
                                               
                 
Organizers:

 

Giorgia Franchin graduated from the University of Padova (Italy) with a Bachelor’s Degree (2011) and a Master’s Degree (2013) in Materials Engineering. In 2017 she obtained PhD in Industrial Engineering from the University of Padova. During her PhD studies she worked at Massachusetts Institute of Technology (MIT) Media Lab (Cambridge, MA) with the Mediated Matter group. Currently she is a post-doctoral researcher at the University of Padova in the Advanced Ceramics and Glass group. Her main research interests are in the Additive Manufacturing (AM) of ceramic materials. She is working mainly on direct ink writing using preceramic polymers and geopolymers to produce highly porous lattices and bioceramic scaffolds, and on different AM processes for glass production.


 

Andrea Zocca graduated from the University of Padova (Italy) with a Bachelor’s degree (2009) and Master’s degree (2011) in Materials Engineering. In 2015 he obtained a PhD in Materials Engineering from Clausthal University of Technology (Germany) and the University of Padova, in the frame of a joint doctorate. During his PhD studies he worked at BAM, Federal Institute for Materials Research and Testing, Berlin (Germany) and at Department of Industrial Engineering, University of Padova (Italy). In 2015 he obtained an Adolf Martens post-doc fellowship at BAM. Currently he is post-doctoral researcher at BAM in the division of Ceramic Processing and Biomaterials. His main research interests are in the Additive Manufacturing of ceramic materials, with focus on technical ceramics and on the processing of preceramic polymers.

 
 
David Karl received a diploma in fine art from Braunschweig University of Art (2010) studying with Nicola Torke, Jospehine Pryde, Dörte Eißfeldt and Thomas Rentmeister. He earned a Master of Fine Arts at the Slade School of Fine Art of University College London (2012). In 2015 he obtained a bachelor's degree in materials sciences from Technical University of Berlin. At present he is pursuing a PhD at the chair of Advanced Ceramic Materials headed by Prof. Dr. Aleksander Gurlo. Since 2016 his work has been supported by the Evonik Foundation. His current research focuses on the Additive Manufacturing of composites as well as ceramic materials.