Committees yCAM 2019


Local Organizing Committee yCAM 2019: 



  
              
from left to right:

Dorian Deschuyteneer graduated from the Polytechnical University of Mons (Belgium) with a Master Degree (2009) in Chemistry and Materials Science Engineering. In 2014, he obtained a PhD in Materials Engineering from the Polytechnical University of Mons - UMONS (Belgium). During his PhD studies, he worked at BCRC, Belgium Ceramic Research Centre, Mons (Belgium) in the Research and Industrial Support Department. The subject of his PhD Thesis was related to MMC (Metal Matrix Composites) wear resistant coatings processed by laser cladding. Then, he continued his research to develop a two-step laser cladding process and participated in different research projects in the field of SLM/SLS and bricks development within an industrial partner facility. Currently, he is mostly working with the industrial support department in the field of additive manufacturing and participates in a research project on prenormative protocol to determine the density of the powder bed within the equipment for the powder bed additive manufacturing technologies (Binder Jet, SLM/SLS, EBM).

Marie-Sophie Renoirt obtained a master’s degree in Chemistry in 2014 at the Faculty of Science, University of Mons (UMONS), Belgium. Since 2014, she has been pursuing a PhD thesis at the Faculty of Engineering (Materials Institute) at UMONS. In parallel to her PhD, she is Research and Teaching Assistant in the Ceramic Unit of the Material Science Department, taking part of the UMONS Materials Institute. Her main research interest is in the elaboration of piezoelectric glass-ceramics for sensors applications. She is working on Fresnoite glass-ceramics and their potential to generate Surface Acoustic Waves.

Dominique Hautcoeur graduated from the University of Valenciennes (Fance) with a Bachelor’s degree (2008) and Master’s degree (2010) in Materials Engineering. In 2014 he obtained a PhD in Materials Engineering – Ceramics field from the University of Mons (Belgium). During his PhD studies he worked at BCRC, Belgian Ceramic Research Centre, Mons (Belgium). Currently he is junior researcher at BCRC in the division of Ceramic Processing. His main research interests are in the processing of ceramic materials, with focus on technical porous ceramics and on additive manufacturing.


 

Committee yCAM 2019:

  
from left to right:

Andrea Zocca graduated from the University of Padova (Italy) with a Bachelor’s degree (2009) and Master’s degree (2011) in Materials Engineering. In 2015 he obtained a PhD in Materials Engineering from Clausthal University of Technology (Germany) and the University of Padova, in the frame of a joint doctorate. During his PhD studies he worked at BAM, Federal Institute for Materials Research and Testing, Berlin (Germany) and at Department of Industrial Engineering, University of Padova (Italy). In 2015 he obtained an Adolf Martens post-doc fellowship at BAM. Currently he is post-doctoral researcher at BAM in the division of Ceramic Processing and Biomaterials. His main research interests are in the Additive Manufacturing of ceramic materials, with focus on technical ceramics and on the processing of preceramic polymers.

Giorgia Franchin graduated from the University of Padova (Italy) with a Bachelor’s Degree (2011) and a Master’s Degree (2013) in Materials Engineering. In 2017 she obtained PhD in Industrial Engineering from the University of Padova. During her PhD studies she worked at Massachusetts Institute of Technology (MIT) Media Lab (Cambridge, MA) with the Mediated Matter group. Currently she is a Research Fellow at the University of Padova in the Advanced Ceramics and Glass group. Her main research interests are in the Additive Manufacturing (AM) of ceramic materials. She is working mainly on direct ink writing using preceramic polymers and geopolymers to produce highly porous lattices and bioceramic scaffolds, on ceramic matrix composites and on different AM processes for glass production.

David Karl received a diploma in fine art from Braunschweig University of Art (2010) studying with Nicola Torke, Jospehine Pryde, Dörte Eißfeldt and Thomas Rentmeister. He earned a Master of Fine Arts at the Slade School of Fine Art of University College London (2012). In 2015 he obtained a bachelor's degree in materials sciences from Technical University of Berlin. At present he is pursuing a PhD at the chair of Advanced Ceramic Materials headed by Prof. Dr. Aleksander Gurlo. Since 2016 his work has been supported by the Evonik Foundation. His current research focuses on the Additive Manufacturing of composites as well as ceramic materials.